|
If you're a pc technician or system builder, you
know that not every new setup always goes as planned. Whether it's a
defective part or grounding issue, you're likely to have to remove components
from a case in order to begin the troubleshooting process. It is these
times when you which you had something better and more efficient to work with.
That's where the Tech Station from HighSpeed PC comes in. An open air
computer test bench, the Tech Station has been under extensive revisions by
HighSpeed PC in order to provide a better product and forward compatibility.
Let's have a closer look...
|
**click to enlarge** |
**click to enlarge** |
Delivered in a rather small plain white box, the
Tech Station comes with everything you need to get it setup, including an
installation guide. I was a bit surprised, as I thought it
was much bigger in size. Regardless, it's big enough to support all
common components in a standard setup. Also included is a 120mm fan with
grill, bag of hardware, power/reset switches and install guide.
**click to enlarge**
We received our sample a while back, but there
was a slight delay in releasing this article due to some missing screws. However, HighSpeed PC
quickly sent out a new set of installation hardware as well as a revised
installation guide.
Specifications
Highlights:
- Puts all your PC hardware within easy reach
- Non-conductive design - High grade polymers - HDPE bench
surfaces
- Heavy-duty construction - Sturdy and stable - Can support
over 160+ lbs!
- Attractive look - High quality materials - Proudly display
this test bench
- Dimensions: Std: 14x8x8.5 Lrg: 14x13x8.5 (custom
sizes/colors available)
Includes:
- HDD storage/cooling
rails for up to two 3.5" hard
drives
- AGP/PCI card support brace w/ thumb screws
- ATX Control Kit* (mini
power/reset switches, LED's, speaker)
- Rubber non-slip feet
- Self-stick pads for top shelf grip
-120mm fan - Ideal cooling
- Anti-static foam motherboard cushion
- Assembly & use guide (Kits retail boxed) |
|
|
|
