|
Features
Let's being with its most appealing, the front
end.
|
**click to enlarge** |
**click to enlarge** |
The front drive bay covers are aluminum
honeycomb style covers designed not only for great looks, but for added ventilation
as well. The bottom
features a large aluminum knob for control of the two large 120mm blue LED
fans.
**click to enlarge**
The top front features your I/O extension ports,
aluminum buttons and a small backlit LCD temperature display with alarm
functionality.
The Wind Tunnel
**click to enlarge**
**click to enlarge**
On the inside, is the other most impressive
feature. The unique "Wind Tunnel" is essentially a full-sized plastic
air duct that connects to both of the large 120mm fans located on the front
and back end of the case. This will provide more efficient cooling by
directing airflow directly over the CPU and directly in and out of the case.
In fact, the motherboard is actually installed differently due to the
obtrusiveness and so that the CPU is located in the path of the air duct
itself. This case supports extended ATX motherboards and there is even
an adapter included for dual CPU setups.
**click to enlarge**
Should you require additional cooling,
there is support for an 80mm fan that you can slide and mount easily on the
fan adapter located directly above the air duct.
**click to enlarge**
Removing the large air duct will reveal the
small fan controller mounted on the bottom of the case. This controller
supports up to 4 fans and are controlled via the large aluminum knob on the
from of the chassis.
**click to enlarge**
The large drive cage is located on the upper
part of the case, directly above the PCI expansion slots. Using the
included drive rails, it will allow vertical tool-free installation of your
hard drives.
**click to enlarge**
The PCI slots also feature a tool-free design.
The plastic clips can be easily pulled out and allow for quick card installs.
|
**click to enlarge** |
**click to enlarge** |
Finally, the MaxFlow CS-718 wouldn't be complete
without a quality 460W Enermax power supply that includes two Serial ATA
connectors and RPM monitor cable. It features a 6 pin power
connector for those who will be using a PCI Express video card. It
also features cable some cable sleeving as well as a fan control knob on the
rear of the unit.
|
