|
For this project we chose a Velocity model T3
pump.
Here are the manufacture's specs for this pump:
Manufactured with noryl housings and impeller, titanium rotor and separating
wall, ceramic bearing ball, carbon graphite bearing cap and EPDM o-ring.
Energy efficient (rated at 1.3 amps) and ultra-quiet (less than 30 db).
Features Dry Run Cutout with thermal switch for added safety.
Rated for temperatures to 140° F and line pressures to 50 psi
Back pressure management:
900 GPH @ 0 head
800 GPH @ 3 head
240 GPH @24 head
Dimensions: 5x6x3.5
For us the most attractive features were the pump's footprint, its efficiency,
its ability to handle back pressure, and its low operating noise. |
