|
Installation is fairly
straightforward.
The top panel is easily removed by pressing and
pushing back the small catch located on the top right of the inner tray as
shown to your left. Inside, you'll find your molex
connector and IDE connector for your hard drive.
Simply plug in your power and IDE cable and
slide the drive back in the tray as shown above.
The rack is mounted in your 5.25" bay with the
included screws. That's it! Your done!
Well, almost...
The particular model we received from BeanTech
features an electric power key lock. You need to lock the drive with the
included keys in order to supply power to the drive and fans. Above is
just a shot of the drive in it's locked or "on" position. It is
important to never turn the key to remove the drive while it is in use or data
loss may occur.
Conclusion
The BT68AEA is ideal for those looking to
transport data safely and those looking for a little extra extra cooling to go
with it. It's overall design may not turn heads, but performed as
expected and offers a few extras such as dual fans and shock absorbers.
The only thing it really lacks is a full aluminum enclosure.
|
Pros |
Cons |
- Easy installation
- Shock Absorbers
- Dual quiet fans
|
|
|
