|
Layout and Features
The I/O configuration is
outstanding for a value priced motherboard:

As you can see from the following picture
everything is nicely laid out on the aesthetically pleasing blue motherboard.

**click to enlarge**
The IDE and Floppy connectors are well
positioned along the edges of the motherboard.

**click to enlarge**
Don’t expect to use an Alpha heatsink or similar
with the motherboard. A heatsink with a base footprint of approximately 65mm x
65mm will be the maximum size this board will accommodate.

**click to enlarge**
The Via 8375 Northbridge chipset is passively
cooled by a very impressive aluminum heatsink. The heatsink fit flush against
the chipset, but we did remove it and apply Arctic Silver thermal compound to
its base (as is our custom) in order to ensure maximum heat transfer.

**click to enlarge**
For those that wish to use a
4X AGP card in lieu of the integrated graphics, an AGP slot is provided. 3
PCI slots and a CNR (Communication Network Riser) slot are also provided in
order to accommodate future expansion requirements.

**click to enlarge**
The ATX connector’s position on the motherboard
is our only gripe. Care should be exerted to prevent the PSU’s ATX cables from
interfering with the heatsink fan combination.

**click to enlarge**
Audio is provided by way of the onboard VIA ’97
CODEC. In addition to the rear ports previously mentioned, an SPDIF1 header
permits the use of third party audio extension brackets.
The onboard controller drives the standard 2 IDE channels, supporting a
maximum of 4 devices at ATA 66/100/133 modes.
AMD CPUs operating at 200/266 FSB are compatible with the MK77M-V. The CPU
frequency is set by way of a jumper.
In addition to the 2 rear USB ports, a motherboard header allows expansion for
2 more ports for a maximum of 4.
If you have an infrared device, this motherboard can implement SIR (standard
IR) transfer function.
Memory is configured automatically in the BIOS. The 2 x 184-pin DDR DIMM banks
allow a maximum of 2GB of PC2100 memory to be installed.
|