|
The BIOS
The
KM4M-L uses the Phoenix AwardBIOS that most people are used to seeing from
MSI and other high performance boards.
|
**click to enlarge** |
**click to enlarge** |
These are some of the main screens that you
will probably be working with. On the left is the main BIOS screen, and on
the right is the Advanced BIOS Features menu.
|
**click to enlarge** |
**click to enlarge** |
**click to enlarge** |
Here are a few shots from the Frequency and
Voltage control screens. Notice that the FSB is grayed out at the top of the
list. DDR voltage and timing is adjustable to a limited extent.
|
**click to enlarge** |
**click to enlarge** |
This screen on the left was the real
heartbreaker. On the overclockable versions of this board there is normally
a third option in this screen that allows you to adjust the FSB. On the
KM4M-L the only clock settings are jumpers on the motherboard, which allow
you to select one of the stock FSB speeds – 100/133/166. This is also
something to keep in mind when setting the board up to make sure that you do
not end up underclocking your CPU.
|
